PIR Presence Detectors

PDWM1500 120° Wall Mount PIR Presence Detector

Timeguard take PIR Presence Detection to the next level for optimum coverage and with up to 1500W loading and 10m detection range this powerful unit is the ideal choice for all energy saving installations.

  • Switches lights ON when presence is detected and to light level (LUX) settings.
  • Ideal for energy saving installations in the workplace, corridors, offices, toilets etc.
  • Up to 1500W loading (6A) for incandescent, halogen, fluorescent and inductive lighting or 250W (1A) fan.
  • Units can be wired in parallel (not exceeding total load).
  • Enhanced 120° detection zone for optimum coverage.
  • Up to 10m detection range for motion and 5m for presence detection at 1.8m mounting height.
  • User-friendly adjustment for:
* Light level – 5 to 1000 LUX
* Time ON – 1 to 30 minutes.
  • IP55 environmental rating (internal use only).
  • For surface mounting on a standard BS surface mount or flush mount box (min 16mm depth).
  • 3 wire connection.
  • Part No. PDWM1500

« Back to product section

Specification

Operating Voltage 230V AC
1 or 2 Channel 1 Channel
1st Channel Filament/Halogen Loading (W) 1500
1st Channel Fluorescent/Low Energy Loading (W) 1500
Weatherproof Rating IP55
Detection Range (Max) Metres 10m motion, 3m presence
Angle of Detection 120º
Light On Time After last detection (Adjustable) 5 Seconds (Min), 18 Minutes (Max)
Permanent ON Facility Electronic
Adjustable Light Level (LUX) Control 5 to 1000 LUX
Conforms to Directives 73/23/EEC, 89/336/EEC
Overall Dimensions (mm) Height 86, Width 86, Depth 22

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.