PDFMMINIL 360° Flush Mount Linkable Mini PIR Sensor
Mini design (47mm diameter) for corridor and multi-zone use with Twist & Lock design for easy access. Linkable pre-wired RJ11 plug-in slave units allow quick installation with up to 5 slaves to one master unit.
- Designed for corridor and multi-zone use.
- Mini unobtrusive design (47mm diameter).
- Detection: 360°.
- 3 metre presence detection.
- 8 metre motion detection.
- Twist & Lock design for easy access.
- Pre-wired RJ11 plug-in slave units for quick installation.
- Linkable. Up to 5 slaves can be added to 1 master.
- Load: halogen max. 1000W. LED max. 250W.
- LUX adjustment: 5 – 1000 LUX.
- Time adjustment: 30 seconds to 30 minutes (master only).
- Termination box for ease of wiring.
- Masking kit included.
- LED indication.
- IP40 weatherproof rating.
|Operating Voltage||230V AC, 50Hz|
|Class Rating||Power box Class 2, PIR Sensor Class 3|
|Total PIR Switching||2300W Halogen, 500W Low loss balance fluorescent, 250W Electronic balance fluorescent, CFL and LED Lighting|
|Weatherproof Rating||Power box IP20, PIR Sensor IP40|
|Operating Temperature||-20°C to +40°C|
|Motion Detection Range||8m Diameter at a 2.5m mounting height|
|Presence Detection Range||3m Diameter|
|Angle of Detection||360°|
|Time ON Adjustment||30 Seconds to 30 Minutes|
|Warm-up Time||60 Seconds|
|Lux (Light) Level Adjustment||10 to 2000 Lux|
|Manual Override Mode||Double pulse within 2 seconds to enter 6 hours ON time|
|PIR Sensor Connection Cable||Pre-fitted 250mm long cable with an RJ11 connector|
|Ceiling Cut-out||40mm Diameter hole|
|Overall Dimensions||Power box H=35mm, W=175mm, D=35mm, PIR Sensor 47mm Diameter body, 64mm height|
|EC Directives||Conforms to latest directives|
Multiple PIR Sensor Switching: A maximum of 5 PDFMMINILS Slave PIR sensors can be linked to the PDFMMINIL Master PIR, to enable any detector to turn ON all the lights connected (The total load must not exceed the lamp rating of a single PDFMMINIL unit).