Emergency Assist Alarms

EASSCP1PR Single Zone (Stainless Steel Finish) Control Panel with Battery Back-Up - 2 Gang

Shares all the features and benefits of the EACP1PR but has a stainless steel finish.

Single zone control panel with audible and visual alert, reset button, standby LED (on mains operation) and automatic fault detection that warns of a wiring problem.

  • Simple to install 2 core wire connection from control panel to kit components.
  • Single zone systems ideal for WC’s and rooms in the home, shop conversions and small businesses.
  • Continuous high dB Control Panel alarm with audible and visual alerts.
  • Optional Hi/Low alarm sounder facility.
  • Control Panel fits standard BS flush 2 gang or surface mounted boxes.
  • Complies with BSEN 60065: 2002.
  • Designed to meet requirements of the DDA (Disability Act).
  • Battery back-up in the event of a power failure.
    - 36 hours in standby.
    - 45 minutes in continuous alarm condition.
  • Part No. EASSCP1PR

« Back to product section

Specification

Switch Type Double Gang
Operating Voltage 230V AC
Unit Finish Stainless Steel
Zone Detection Single
Alarm 65dB Continuous
System ‘Live’ Status Yes
Auto Fault Detection Yes
Power Reserve Typically 4 Days in Standby, 2 Hours in Continuous Alarm
Cable Capacity 3 × 1.5mm², 7/0.2
Conforms To: BSEN 60335-1, 73/23/EEC, 89/336/EEC
Dimensions (mm) Height 85, Width 145, Depth 33
Min. Box Depth 25mm

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.