PIR Presence Detectors

PDFM1500 360° Ceiling PIR Presence Detector – Flush Mount

Timeguard take PIR Presence Detection to the next level for optimum coverage and with up to 1500W loading and 10m detection range this powerful unit is the ideal choice for all energy saving installations.

  • Switches lights ON when presence is detected and to light level (LUX) settings.
  • Ideal for energy saving installations in the workplace, corridors, offices, toilets etc.
  • Up to 1500W loading (6A) for incandescent, halogen, fluorescent and inductive lighting or 250W (1A) fan.
  • Units can be wired in parallel (not exceeding total load).
  • Enhanced 360° detection zone for optimum coverage.
  • Up to 10m detection range for motion and 3m for presence detection at 3m mounting height.
  • User-friendly adjustment for:
* Light level – 5 to 1000 LUX
* Time ON – 1 to 30 minutes.
  • IP44 environmental rating (internal use only).
  • Requires a 63mm or 64mm diameter installation hole cut-out.
  • Instructions and fixing accessories in box.
  • Dimensions: 72mm Ø x 68mm.
  • Part No. PDFM1500

« Back to product section

Specification

Operating Voltage 230V AC
1 or 2 Channel 1 Channel
1st Channel Filament/Halogen Loading (W) 1500
1st Channel Fluorescent/Low Energy Loading (W) 1500
Weatherproof Rating IP44
Detection Range (Max) Metres 10m motion, 3m presence
Angle of Detection 360º
Light On Time After last detection (Adjustable) 5 Seconds (Min), 18 Minutes (Max)
Permanent ON Facility Electronic
Adjustable Light Level (LUX) Control 5 to 1000 LUX
Conforms to Directives 73/23/EEC, 89/336/EEC
Overall Dimensions (mm) Diameter 72, Depth 68

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.