Weather

Weather Station Weather Station

Combination device for commercial units as well as for larger family houses.

This combination weather station may be used
to measure brightness, temperature, rain and wind. The various threshold values may be selected in any combination, e.g. wind and brightness only.

7 different channels can be used, each with adjustable threshold values. 4 of these are universal channels that allow any combination of the measurement variables, and 3 sun protection channels that are optimized especially for blind, awning and roller shutter applications.

The automatic sun protection controls the blinds/shutters/awnings independently during the day, without any intervention necessary. When a threshold is reached, two separate telegrams can be sent, e.g. for height and slant of a blind or a value and switch telegram.

Because the brightness values for 2 sun protection channels can be specified via only a single channel, the weather station can also calculate the sun protection function for sides of the building other than where it is installed. The ideal sensor for this is the LUNA 133 brightness value transmitter.

The teach-in objects for the brightness threshold are user-friendly. This makes it possible for the customer to redefine the thresholds with the touch of a button, without having to parameterize the weather station again.

  • Records wind, rain, brightness and temperature
  • Ultra sensitive rain sensor. A delay can be set for after rain has stopped to prevent unnecessary movement of blinds
  • Measured variables can be transmitted directly to the bus and for example, displayed via the multifunctional display and VARIA operating unit
  • Wind, brightness, temperature are each transmitted as 2-byte values, rain as 1 bit
  • Wind can be transmitted either in m/s or km/h
  • The data are evaluated in the device itself
  • Power supply from bus voltage and 230V
  • Brightness range 1 – 100,000 lux.
  • Temperature range –20 °C … +55 °
  • 4 universal channels
  • 3 sun protection channels (specifically for blind and shutter application)
  • Integrated bus coupler
  • Integrated heater for rain sensor
  • Automated sun protection mechanism for independent control of blind, awning etc
  • The brightness threshold teach-in features are user-friendly and enable the customer to retrospectively define the threshold with the keystroke. This does not require the weather station to be re-configured
  • The automated sun protection mechanism inde-pendently controls the blind (shutter/awning) during the day without no manual intervention. When a threshold is reached, two separate tele-grams can be sent, e.g. for height and slat of a blind or a value and switching telegram
  • The different channels can have any configuration

« Back to product section

Specification

Measure range –20 °C … +55 °C
Brightness range 1–100.000 Lux
Light detection angle 150°
Operating voltage Bus voltage and 230 V necessary for heating
Product consumption ≤ 10 mA
Degree of protection IP44 (EN 60529)
Housing 280 × 160 × 135 mm

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.