Switching/Blind

RMG 8 8-Channel Blind/Switching Actuator (Basic Module)

Flexible use means that each channel can be used selectively to switch consumers on and off (Switching function), or the phase sequence and runtime of motors can be controlled (Blinds function). The manual switches are used for Up/Down and for switching On/Off.

Relay outputs for 4 drives or 8 switching channels or random mixed operation of drive and switching functions.

  • Modular expandability from four to eight blinds or from eight to sixteen switching outputs
  • Capability of addressing blind (including louver) or shutter positions directly for: canvas blinds, blinds, shutters and several sun and sight protections, skylights and ventilation flaps
  • Optimised repeatability of the programmed louver position
  • The wide range of switching functions is ideal for: shading, lighting and heating of greenhouses and conservatories, lighting of buildings, staircases, delayed on or off switching of groups of lights, short or long pulses for schoolyard bells or toilet flushing and ventilation
  • In case of extensions of HMG 8 with RME 8 only switching channels are possible, no drive control

« Back to product section

Specification

Operating voltage 230 V/240 V ± 10 %
Rated frequency 50 Hz
Product consumption Max. 4 VA
Current consumption of bus ≤ 8 mA
Contact material Ag SnO2
Type of contact Closing contact, floating
Switching capacity 10 A 250 V AC, cos φ = 1, 6 A 250 V AC, cos φ = 0.6
Incandescent lamp load 1400 W/VA
Halogen lamp load 1400 W/VA
Permissible ambient temperature –5 °C … +45 °C
Class of protection II (after correct installation)
Degree of protection IP 20 (EN 60529)
Standard housing 45 × 105 × 60 mm (6 modules)

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.