Presence

ECO IR 360 DUAL Presence Detector

Presence detector for large-area applications in classrooms, offices and public areas.

  • Realisation of daylight controls with two
    different light bands as well as two light setpoint values for example
  • Depending on user behaviour the self-learning run-on time varies between the set minimum value and 15 mins.
  • Square detection range, 360°
  • Automatic control of two lighting groups
  • Double “Genuine daylight measurement”
  • Two light outputs
  • Lighting control with two light threshold values and self-learning run-on time
  • Choice of fully or semi-automatic operation
  • The switching behaviour of the presence detector is controlled by presence and light.
  • The lighting switches on with darkness and presence and off with sufficient light or absence
  • Fully or semi-automatic: In “Fully automatic” mode the light switches on and off automatically according to presence and light. In “Semi-automatic” mode it must be switched on manually and switches off automatically
  • The presence detector has double “Genuine light measurement” and is only suitable for switching fluorescent lamps (FL/PL)
  • Master/slave parallel switching: Several detectors can be connected with each other to increase the detection area.
  • The master controls lighting and HVAC. All other detectors merely provide presence information as slaves
  • Master/master parallel switching: Several detectors can be connected with each other to control several lighting groups. Every master controls its lighting group according to its own light measurements. Presence is detected by all the detectors
  • Master or slave operating mode is selected via configuration
  • Test operating mode checks the detection range and configuration
  • The parameters are set by ETS or potentiometer

« Back to product section

Product image
  • 2 Year Guarantee (from date of manufacture)

Specification

Detection range 360° horizontal, 120° vertical
Recommended installation height 2.0 m–3.5 m
Max. range Max. 8 × 8 m at a height of 2.5 m max. 10 × 10 m at a height of 3.5 m
Genuine daylight measurement approx. 100–1600 lux can be deactivated, approx. 25–200 lux (extended)
Light run-on time 30 s-20 min
Assembly plate 70 × 70 mm
Connection Bus terminal
Size of flush-mounted socket Socket Ø 55 mm (NIS, PMI)
Ambient temperature +0 °C… +45 °C
Protection rating IP 40

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.