Presence

Compact Passage Ceiling Presence Detector

Ceiling presence detector for controlling up to 2 lighting groups as well as output to HVAC control.

  • Use in hallways and corridors
  • Passive infra red presence detector for ceiling installation
  • Square detection area, 360°, max. 30 × 4,5 m.
  • Mixed light measurement
  • Two light outputs for controlling two lighting groups
  • Switching or constant light control
  • Choice of fully or semi-automatic operation
  • Presence output for HVAC control with switch on delay and run-on time
  • Room monitoring with selective movement detection
  • Integrated bus coupling
  • QuickSet plus service remote control (optional)
  • Clic user remote control (optional)
  • The switching behaviour of the presence detector is controlled by presence and light, as required in switching or constant light control operating modes
  • In the “Switching” operating mode, the lighting switches on with darkness and presence and off with sufficient light or absence. In the “constant light control” operating mode the sensor controls the artificial light daylight-dependent on a constant lighting level
  • Fully or semi-automatic: In “Fully automatic” mode the light switches on and off automatically according to presence and light. In “Semi-automatic” mode it must be switched on manually and switches off automatically
  • The presence detector has a mixed light measurement and is suitable for controlling the following types of lamp: fluorescent lamps (FL/PL), halogen and glow lamps
  • Presence output for HVAC control: Switching behaviour is only controlled by presence
  • The switch-on delay prevents instantaneous switch on. The presence output only switches after the delay is completed
  • The monitoring output works with reduced sensitivity and indicates the presence of persons with a high level of accuracy
  • The light output makes the light information available for visualisation purposes
  • Master/slave parallel switching: Several detectors can be connected with each other to increase the detection area
  • The master controls lighting and HVAC. All other detectors merely provide presence information as slaves
  • Master/master parallel switching: Several detectors can be connected with each other to control several lighting groups. Every master controls its lighting group according to its own light measurements. Presence is detected by all the detectors
  • Master or slave operating mode is selected via configuration
  • Test operating mode checks the detection range and configuration

« Back to product section

Product image
  • 2 Year Guarantee (from date of manufacture)

Specification

Detection range 360° horizontal , 120° vertical
Recommended installation height 2.0 m – 3.0 m
Maximum range Max. 30 × 4 m at a height of 2.5 m.
max. 30 × 5 m at a height of 3.5 m
Mixed light measurement Approx. 10 – 1500 lux
Light run-on time 30 s – 20 min
Light stand-by time 0 sec. – 60 mins/on
Presence run-on time 30 s – 120 min
Presence switch on delay s – 30 min
Assembly plate 70 × 70 mm
Bus connection Bus terminal
Size of flush-mounted socket Socket Ø 55 mm (NIS, PMI)
Ambient temperature +0 °C… +50 °C
Protection rating IP 40

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.