Heating

RAM 713S Single-Room Temperature Regulator

Single-room temperature thermostat for controlling heating or motorized actuators.

The RAM 713 S KNX is a single-room temperature controller for wall mounting with integrated bus coupling.
Two setting wheels are included in delivery:
– an absolute scale (standard) in °C
– a relative scale (extra)
We support the old objects for defining the operating mode (comfort, night, anti-freeze) as well as the new objects (operating mode, presence, window status).

  • The manual button can be used as operating mode selector as well as presence button
  • RAM713S can be used as both a continuous controller and a 2 stage controller (can also be combined)
  • A status LED indicates if the system is currently heating (red), cooling (blue) or if the desired temperature has been reached (off)
  • Constant PI control that can be be configured for 2-stage heating (basic and supplemental stage, e.g., floor heating and radiators) or for heating and cooling (radiator and cooling ceiling)
  • Manual button for presence or operating modes: Comfort, standby, nighttime switch-off, anti-freeze protection
  • Status LED (red/blue/off) shows the user which functions the regulator momentarily carries out
  • The setting wheel can be limited with an adjust-able stop mechanically or by means of para-meters. The system can be shut off completely by means of software.
  • 3 inputs for conventional switches/buttons for
    the functions: switching, dimming, blind adjusting
  • The inputs can also be used for external temperature sensor, window contact or presence signal

« Back to product section

Specification

Power supply Bus voltage
Setting range 10 °C … 28 °C
Measure range 0 °C … 40 °C
Temperature restriction Through external floor sensor 5 °C… 48 °C
Temperature sensor (IP 65) encased with 4 m connecting cable
Product consumption ≤ 10 mA
Degree of protection IP 20 according to EN 60529-1
Housing: 80 × 84 × 27 mm

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.