Heating

RAM 713 FC Fan Coil Continuous Regulator

The RAM 713 FC KNX is an individual room controller designed for wall installation with integrated bus coupler.
Two rotary controls are included in delivery:
– an absolute scale (installed)
– a relative scale (enclosed).
Objects can be configured for setting operating modes, presence as well as window status.

  • Manual switch can be used as operating mode selector for OFF, auto or fan stage 1,2 or 3
  • LEDs display heating (red) or cooling (blue) status or whether the desired temperature has been reached
  • The manually or automatically operated fan stages can be displayed via 3 LEDs
  • Continuous PI controller for heating and cooling
  • Status LED (red/blue/off) shows the user which function is being performed by the controller
  • Rotary controls can be set mechanically using tappets or via parameters. The software can be used to turn it off completely
  • 3 inputs for conventional switches/keys for the following functions: switching, dimming, blinds
  • Inputs can also be used for external temperature sensors, window contact or presence signal

« Back to product section

Specification

Power supply Bus voltage
Setting range 10 °C … 28 °C
Measuring range 0 °C … 40 °C
Temperature restriction Through external floor sensor 5 °C… 48 °C
Temperature sensor (IP 65) encased with 4 m connecting cable
Power consumption ≤ 10 mA
Protection rating IP 20 in accordance with
EN 60529
Housing 80 × 84 × 27 mm

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.