Heating

HMT 6 6-Channel Heating Actuator

The house is suitable for the mounting of heating circuit distributors with triacs enabling noiseless switching of the actuating drives.
The heating actuators (HMT 6 / HMT 12) optimise the efficiency when using room temperature controllers together with thermic actuating drives and enable the integration of a boiler control.

  • 6 channel heating actuator for controlling of thermic actuating drives
  • Easy wiring of the drives (24 V)
  • Mounting directly on the wall or on the rail in the heating circuit distributor
  • Plug at the transformer for easy installation
  • Connection of up to 13 thermic actuating drives (24 V) and power supply through built-in transformer
  • Continuous and switching controller output can be chosen
  • Compulsory mode via object
  • Summer mode omits undesired heating insummer (valve protection in the summer mode can be chosen)
  • Emergency mode in case of bus or sensor failure- behaviour in case of failure adjustable
  • Cyclic checking of the controller output(for determination of the maximum controller output)
  • Treating of the continuous controller output
  • Automatic releasing of the thermal actuators after switching on
  • Determination of the max. correcting variable to be considered by the boiler control

« Back to product section

Specification

Operating voltage 230 V AC/24 V DC
Max. power consumption 50 W
Protection T 2 A
Max. number of drives 13
Heating programs optional 2
Dimensions H/B/L 70 × 75 × 302 mm
Weight 1700 g
Protection class II (after correct installation)
Degree of protection IP 20 (EN 60529)
Massive power 0.5 – 1.5 mm²
Flexible power * 1.0 – 1.5 mm²

* wires of the drives can be used with end sleeves for strands, mounted ex works.

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.