Blinds

JME 4S 4-Channel Blind Actuator (Extension Module)

The MIX series is a collection of devices consisting of base modules (e.g. JMG 4S) and extension modules (e.g. JME 4S).
Up to 2 upgrade modules can be connected in series to the basic modules in this series.

The phase sequence and runtime of motors can be controlled per channel. The manual switches operate UP/DOWN actions. The relays switching status are displayed via LEDs.

  • Relay outputs for 4 drives
  • Mixed use of drive and switch functions possible as required
  • Drive controls for controlling blinds, shutters and various solar and visual protective devices and for skylights as well as ventilation flaps
  • 4 output channels each with a floating UP and a floating DOWN contact
  • Manual UP and DOWN key for each channel
  • LED UP and DOWN display for each channel

« Back to product section

Specification

Operating voltage V, ± 10 %, 50 Hz
Power consumption < 2.5 VA
Power draw < 8 mA (incl. 2 upgrades)
Bus connection Bus terminals
Output: Contact material AgSnO2
Type of contact NO contact, floating
Switching capacity 3 A, cos φ = 1
Permissible ambient temperature –5 °C … +45 °C
Protection class II subject to correct installation
Protection rating IP 20 in accordance with EN 60529
Housing 45 × 72 × 60 mm (4 modules)

NOTE: Timeguard has a policy of continuous product development and reserve the right to alter specifications at any time. Therefore, unavoidable differences between product and website specifications may occur, for which liability cannot be accepted by Timeguard.